Flexo printer slotter - PS-500
A Type : 「Fully computerized」 - All gaps can be set by touch screen or computer.
B Type : 「Fully motorized」 - All gaps can be set by push button with indication dial.
C Type : 「Semi-motorized」 - All gaps can be set by manual.

PS-500
1200 mm x 2500 mm
1200 mm x 2800 mm
123
Figures in brackets are 4 shaft lead edge feeder
MODEL NO. A & B & C type
PS-500
50"
MACHINE SIZE 1200×2500 1200×2800 
A FINISHED BLANK MAX. 2500 2800
MIN. 685 685
H TWO PANELS MAX. 1205 1355
MIN. 320 320
C SMALL PANEL MAX. 1010 1160
MIN. 125 125
D LARGE PANEL MAX. 1080 1230
MIN. 195 195
E GLUE LAP WIDTH MAX. 45 45
F GLUE LAP LENGTH MIN. 100 100
B SHEET WIDTH
SUN LEAD EDGE FEEDER
MAX. 1170 1170
MIN. 300、( 360 ) 300、( 360 )
SHEET WIDTH (SKIP FEED) MAX. 1520 1520
I×G PRINTING SURFACE LENGTH MAX. 1200×2350 1200×2650
J SLOT WIDTH   7.5 7.5
  SQUARE BOX MAX. 602 677
MIN. 195 195
  MAX. MACHINE SPEED (SHEETS/MIN) FLEXO 250 250
F.F.G --- ---


STANDARD:● OPTION:★
  A B C
FEEDER
Sun lead edge feeder gives accurate registration.
Frequency inverter drives vacuum auxiliary system.
Gates of vacuum box are controlled by different sizes of sheets automatically.
Dust collector.
Setting the gap. Computerized Motorized Manual
Main Touch screen has 2000 job memories.
Computer has 100000 job memories.
Stroke adjustment automatically.
PRINTER
Top or bottom print.
Touch screen monitor.  
Vacuum transfer.
Doctor chamber blade.
Ceramic anilox roll.
Auto ink washing system.
Capable to return previous position.  
Warning signal appears when low level of ink detected by ink sensor automatically.
Fast mounting system or Matthew lock system.
Setting the gaps. Computerized Motorized Manual
Dry unit with cold/heated air or IR.
SLOTTER
Touch screen monitor.
Central knife movable for flexible box design.
Knife collision protection device for fixed knife and moveable knife. Toque Limit
Pre-creasing, creasing, slotting heads lateral move synchronize.
Replacement polyurethane of creasing wheel.
All shafts through precision grinding and hard chrome plated.
Setting the gap. Computerized Motorized Manual
Dual slotter.
ROTARY DIE CUTTER
Bottom die cut or top die cut.
Touch screen monitor.  
Anvil drum lateral oscillation device.
Anvil trimming device.
Speed compensation.
Setting the gap. Computerized Motorized Manual
Rapid mounting system.
STACKER
Side beat to square the sheet board.
Conveyor belt speed is adjustable.
Dual safety device to avoid injury by backstop falling down.
Height of sheet-loading arm is adjustable.
Stripper.