Flexo printer slotter - AFG-5000
A Type : 「Fully computerized」 - All gaps can be set by touch screen or computer.
B Type : 「Fully motorized」 - All gaps can be set by push button with indication dial.
C Type : 「Semi-motorized」 - All gaps can be set by manual.

AFG-5000
1200 mm x 2500 mm
1200 mm x 2800 mm
123
Figures in brackets are 4 shaft lead edge feeder
MODEL NO. A & B & C type
AFG-5000
50"
MACHINE SIZE 1200×2500 1200×2800
A FINISHED BLANK MAX. 2500 2800
MIN. 845 845
H TWO PANELS MAX. 1205 1355
MIN. 400 400
C SMALL PANEL MAX. 900 900
MIN. 180 180
D LARGE PANEL MAX. 860 860
MIN. 220 220
E GLUE LAP WIDTH MAX. 45 45
F GLUE LAP LENGTH MIN. 100 100
B SHEET WIDTH
SUN LEAD EDGE FEEDER
MAX. 1170 1170
MIN. 300、(360) 300、(360)
SHEET WIDTH(SKIP FEED) MAX. --- ---
I×G PRINTING SURFACE LENGTH MAX. 1170×2350 1170×2650
J SLOT WIDTH   7.5 7.5
  SQUARE BOX MAX. 602 677
MIN. 220 220
  MAX. MACHINE SPEED (SHEETS/MIN) FLEXO 220 220
F.F.G 200 200


STANDARD:● OPTION:★
  A B C
FEEDER
Sun lead edge feeder gives accurate registration.
Frequency inverter drives vacuum auxiliary system.
Gates of vacuum box are controlled by different sizes of sheets automatically.
Dust collector.
Setting the gap. Computerized Motorized Manual
Main Touch screen has 2000 job memories.
Computer has 100000 job memories.
Stroke adjustment automatically.
PRINTER
Top or bottom print.
Touch screen monitor.  
Vacuum transfer.
Doctor chamber blade.
Ceramic anilox roll.
Auto ink washing system.
Capable to return previous position.  
Warning signal appears when low level of ink
Fast mounting system or Matthew lock system.
Setting the gaps. Computerized Motorized Manual
Dry unit with cold/heated air or IR.
SLOTTER
Touch screen monitor.
Central knife movable for flexible box design.
Knife collision protection device for fixed knife and moveable knife. Toque Limit
Pre-creasing, creasing, slotting heads lateral move synchronize.
Replacement polyurethane of creasing wheel.
All shafts through precision grinding and hard chrome plated.
Setting the gap. Computerized Motorized Manual
Dual slotter.
FOLDER GLUER
Independent drives for folding rails.
Full length vacuum transfer and guide rollers to accurate folding gap.
Spiral belt is variable to eliminate fishtail.
Pneumatic belt tension control extends belt’s life.
Valco flexo seal contact system or ERO non-contact system.
Spare glue wheel.
Two jam photo eyes for safety and reduce paper waste.
COUNTER EJECTOR
Hold down conveyor for pile compression.
Backstop setup automatically.