Flexo printer slotter - AFG-2000
A Type : 「Fully computerized」 - All gaps can be set by touch screen or computer.
B Type : 「Fully motorized」 - All gaps can be set by push button with indication dial.

AFG-2000
1000 mm x 2200 mm
1000 mm x 2500 mm
123
Figures in brackets are 4 shaft lead edge feeder
MODEL NO. A & B type
AFG-2000
42"
MACHINE SIZE 1000×2200 1000×2500
A FINISHED BLANK MAX. 2200 2500
MIN. 685 685
H TWO PANELS MAX. 1055 1205
MIN. 320 320
C SMALL PANEL MAX. 745 745
MIN. 100 100
D LARGE PANEL MAX. 700 700
MIN. 220 220
E GLUE LAP WIDTH MAX. 45 45
F GLUE LAP LENGTH MIN. 90 90
B SHEET WIDTH
SUN LEAD EDGE FEEDER
MAX. 985 985
MIN. 265 265
SHEET WIDTH (SKIP FEED) MAX. --- ---
I×G PRINTING SURFACE LENGTH MAX. 985×2050 985×2350
J SLOT WIDTH   7.5 7.5
  SQUARE BOX MAX. 537.5 537.5
MIN. 220 220
  MAX. MACHINE SPEED (SHEETS/MIN) FLEXO 300 300
F.F.G 250 250


STANDARD:● OPTION:★
  A B
FEEDER
Sun lead edge feeder gives accurate registration.
Frequency inverter drives vacuum auxiliary system.
Gates of vacuum box are controlled by different sizes of sheets automatically.
Dust collector.
Setting the gap. Computerized Motorized
Main Touch screen has 2000 job memories.
Computer has 100000 job memories.
Stroke adjustment automatically.
PRINTER
Top or bottom print.
Touch screen monitor.
Vacuum transfer.
Doctor chamber blade.
Ceramic anilox roll.
Auto ink washing system.
Capable to return previous position.
Warning signal appears when low level of ink detected by ink sensor automatically.
Fast mounting system or Matthew lock system.
Setting the gaps. Computerized Motorized
Dry unit with cold/heated air or IR.
SLOTTER
Touch screen monitor.
Central knife movable for flexible box design.
Knife collision protection device for fixed knife and moveable knife.
Pre-creasing, creasing, slotting heads lateral move synchronize.
Replacement polyurethane of creasing wheel.
All shafts through precision grinding and hard chrome plated.
Setting the gap. Computerized Motorized
Dual slotter.
FOLDER GLUER
Independent drives for folding rails.
Full length vacuum transfer and guide rollers to accurate folding gap.
Spiral belt is variable to eliminate fishtail.
Pneumatic belt tension control to extend belt lifetime.
Valco flexo seal contact system or ERO non-contact system.
Spare glue wheel.
Two jam photo eyes for safety and reduce paper waste.
COUNTER EJECTOR
Hold down conveyor for pile compression.
Backstop setup automatically.