Flexo printer slotter - AFG-1500
A Type : 「Fully computerized」 - All gaps can be set by touch screen or computer.
B Type : 「Fully motorized」 - All gaps can be set by push button with indication dial.

AFG-1500
635 mm x 1900 mm
123
Figures in brackets are 4 shaft lead edge feeder
MODEL NO. A & B type
AFG-1500
27"
MACHINE SIZE 635×1900
A FINISHED BLANK MAX. 1900
MIN. 400
H TWO PANELS MAX. 910
MIN. 180
C SMALL PANEL MAX. 720
MIN. 80
D LARGE PANEL MAX. 680
MIN. 100
E GLUE LAP WIDTH MAX. 40
F GLUE LAP LENGTH MIN. 80
B SHEET WIDTH
SUN LEAD EDGE FEEDER
MAX. 635
MIN. 190
SHEET WIDTH (SKIP FEED) MAX. ---
I×G PRINTING SURFACE LENGTH MAX. 635×1800
J SLOT WIDTH   6.5
  SQUARE BOX MAX. 455
MIN. 100
  MAX. MACHINE SPEED(SHEETS/MIN) FLEXO 350
F.F.G 300


STANDARD:● OPTION:★
  A B
FEEDER
Sun lead edge feeder gives accurate registration.
Frequency inverter drives vacuum auxiliary system.
Gates of vacuum box are controlled by different sizes of sheets automatically.
Dust collector.
Setting the gap. Computerized Motorized
Main Touch screen has 2000 job memories.
Computer has 100000 job memories.
Stroke adjustment automatically.
PRINTER
Top or bottom print.
Touch screen monitor.
Vacuum transfer.
Doctor chamber blade.
Ceramic anilox roll.
Auto ink washing system.
Capable to return previous position.
Warning signal appears when low level of ink detected by ink sensor automatically.
Fast mounting system or Matthew lock system.
Setting the gaps. Computerized Motorized
Dry unit with cold/heated air or IR.
SLOTTER
Touch screen monitor.
Central knife movable for flexible box design.
Knife collision protection device for fixed knife and moveable knife.
Pre-creasing, creasing, slotting heads lateral move synchronize.
Replacement polyurethane of creasing wheel.
All shafts through precision grinding and hard chrome plated.
Setting the gap. Computerized Motorized
Dual slotter.
FOLDER GLUER
Independent drives for folding rails.
Full length vacuum transfer and guide rollers to accurate folding gap.
Spiral belt is variable to eliminate fishtail.
Pneumatic belt tension control to extend belt lifetime.
Valco flexo seal contact system or ERO non-contact system.
Spare glue wheel.
Two jam photo eyes for safety and reduce paper waste.
COUNTER EJECTOR
Hold down conveyor for pile compression.
Backstop setup automatically.